Outer Limits 4x4 Board

Gents,
What are my options (brand and price) for replacing these? The originals broke on one side not long after I bought the car and without thinking too long and hard, I bought another set from Pedders which broke a while ago. I have been running without them but to me, the car feels a bit unsure of itself on the bendy bits.

Car was lifted @ 3" when I bought it and I am assuming that there lies the issue with standard length links! Don't have a need/want for disconnects. Whiteline sells a set for a little over 200 bills marketed as "super heavy duty" but doesn't have a pic of what "super heavy duty" looks like!!

Any thoughts?

Cheers
Dan

the std whiteline 4" ones will be fine, the super heavy duty ones wear the bearings we found.

the super HD ones look like this [this was on my truck]

Darren
whats the price diff on both? I snapped a right rear one too which was made up to suit at the time apparently.. need new ones

I think one retails for around $140 a pr, and the other around $220 a pr.

The nolathane bushed ones are more than strong enough,a nd dont break like the std ones, and can be adjusted to be right length, as they come in 0-2" and 2"-4" lengths, so that they dont limit up or down travel of the shock.

Thanks a heap bloke

Just had a look at the whiteline website http://www.whiteline.com.au/ and came up with Code: #KLC061 for a 100mm lift.

Looks to be the goods by your pic above.

Cheers
Dan

Swaybar link kit-spherical rod end
2 / adj extra h/duty suit original swaybar
Code: #KLC061
Price: AU$192.36 (Australian Dollars)
NOTE: Australian deliveries must add 10% GST

Swaybar link kit-spherical rod end
2 / adj extra h/duty suit original swaybar
Code: #KLC058
Price: AU$224.73 (Australian Dollars)
NOTE: Australian deliveries must add 10% GST


cant see the $140 kits, you got a part # darren?