Outer Limits 4x4 Board

My 60 series thermostat has just stopped workin. My mate's borrowing the car and he said it stopped the other day. He's had a look under the bonnet and said there's about 20mm wire coming from the thermo housing but nothing after that. Is that what i need to reconnect?

Cheers

Is this 60 diesel or petrol

It's most likely what you need to reconnect or replace. It certainly won't be one of the wires that's already hooked up properly.

Your thermostat has stopped working or your thermo fan has stopped?

Zeyphly wrote:Your thermostat has stopped working or your thermo fan has stopped?

Gauge i assume. Temp sender is in the thermostat housing IIRC.

RED, by rights the thermostat is actually a mechanical valve inside the thermostat housing.

sorry my bad. Yeah, it's the guage that stopped and in case it does make if difference, it's the 2H

If it's the same as my HJ75, the wire should lead from the sender on the thermostat housing down to a plug tucked in somewhere behind the alternator. Hook that up and you should be away.

I remembered there's also a (temp?) sender in the top of the head - anybody know what the score is with that one?

dogbreath_48 wrote:If it's the same as my HJ75, the wire should lead from the sender on the thermostat housing down to a plug tucked in somewhere behind the alternator. Hook that up and you should be away.

I remembered there's also a (temp?) sender in the top of the head - anybody know what the score is with that one?

Temp gauge sender is in the thermostat as Doghead mentioed.
There is a 2 pin sender in the rear or middle of the head (depending on the model) for the Glow circuit, so the relay knows how long to stay on for (so to speak).