Outer Limits 4x4 Board

hey,
about to do a suspension lift on my gen1 swb pajero... does anyone kno the shocks i need to get for a 2 inch lift front and back??? my front shockies are at full travel already and thats when it hits the upper wishbone bump stops.. and my rear shockies only have about 5cm left in them when the back is at full articulation... my front shocks are monroes and are pin at the top and eye at the bottom...

thnx Dan..

Dan,

The fronts will be fine as lifting it will not actually gain you any more travel - just resets your base level. If your shocks are not running short how it is now then it'll be fine. As for the rear, lift it as you were then get some measurements and go from there. But chances are your shocks will be fine for that as well.