Nut size
Posted: Mon Feb 11, 2008 7:43 pm
Hi guys just a real quick question and some of you lot will think that this is a shit one but all i want to know is. What size is the big nut behind my gqs hub.
Page 1 of 1
Posted: Mon Feb 11, 2008 7:57 pm
53mm
Posted: Tue Feb 12, 2008 11:37 am
for the price of a 53mm socket, you can swap the nuts for the GU setup, which is a lot better, has 1 nut and a locking plate which screws to the nut.. wont undo on LH side ect. you have to take the sleve that the hub goes over out of the disk, to fit them on a gq. i replaced mine after fitment, have heard some ppl leave them out.
Posted: Tue Feb 12, 2008 12:12 pm
my left is bigger than my right...
oh shite, sorry, read that wrong
oh shite, sorry, read that wrong
Posted: Tue Feb 12, 2008 5:36 pm
the proper socket is only $20, it wont undo if you know how to use the washers properly......or you could upgrade.
If your too lazy to go buy one you could always get it delivred....
http://cgi.ebay.com.au/Hub-Socket-Toyot ... dZViewItem
If your too lazy to go buy one you could always get it delivred....
http://cgi.ebay.com.au/Hub-Socket-Toyot ... dZViewItem
Posted: Tue Feb 12, 2008 7:38 pm
plus the bother of getting new washers all the time.. only paid $45 for the conversion... reckon its well worth it.
Posted: Tue Feb 12, 2008 9:21 pm
I keep em in stock so i cant say it really worries me, but if you like you can spend $45 as opposed to $3.50...im tight and will stick to the original setup on my own car and customers cars unless they specify otherwise lol