Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux gear driven cases!! strength???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 257
Joined: Wed Sep 07, 2005 8:22 pm
Location: melbourne

hilux gear driven cases!! strength???

Post by mikesmith »

hi guys

looking at putting a set of early gear driven hilux cases duals setup under my gq xtra cab.

just wondering how they are strength wise?? will i break the cases at all??

gq has a 350 chev and turbo 350 auto.

chev is only a mild unit with around 300 hp.

very keen on this setup but dont want to be forever fixes because they are broken.
Last edited by mikesmith on Wed Feb 13, 2008 5:30 pm, edited 1 time in total.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

First it will break the rear output shaft, There is a Chromo Upgrade for this, Then it will break the Input shaft, There is also an upgrade for this, Then it will either break the gears or again the Upgraded Chromo Rear output. If it doesnt break either of these it will break the front output and there is no upgrade currently available for this.

In something as heavy as a GQ with 300HP its not a good choice. I have seen Hiluxs with stock 22R 4Cyl break the outputs.
Top
Posts: 257
Joined: Wed Sep 07, 2005 8:22 pm
Location: melbourne

Post by mikesmith »

hmm thats no good then

anyone want to buy a gearbox??
Top
Posts: 818
Joined: Thu Nov 20, 2003 9:06 am
Location: Bathurst NSW

Post by professor »

to spend all that cash on upgrading the hilux transfer you could save a few more dollars and buy a stak transfer from america.

I know I wish i did, dont get me wrong the hilux transfer is reasonably stong but any time you go upgraging it ends up cheeper to go dearer :? :lol: you know what I mean :)
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

professor wrote:you know what I mean :)
Valvoline :?:
Isn't there a dual case adapter for the gq transfers, If not there is also an atlas case from the states looks good but don't know what there like cost wise.
plenty of parts on the bench
Top
Posts: 257
Joined: Wed Sep 07, 2005 8:22 pm
Location: melbourne

Post by mikesmith »

are they really that weak??

i am only going to run say 36 or 37's

it will be an auto so no clutch dumps

and it is only a ute so no massive body hanging everywhere.
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

some people dont have any trouble at all with the strength and they ive long happy lives. other people break them regularily
turbos are nice but i'd rather be blown
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

The only time i seen one fail was i think a 2nd gear :?: side step off the clutch at full noise. With the auto why not just run your nissan case it should crawl along ok.
plenty of parts on the bench
Top
Posts: 257
Joined: Wed Sep 07, 2005 8:22 pm
Location: melbourne

Post by mikesmith »

if i keep the auto i have Turbo 350 u cannot get adaptors for the nissan case.

only the toyota cases.

i would have to sell it and get a turbo 400 or 700

may as well just go manual
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest