Page 1 of 1
Short tcase arm & rocktoy ring
Posted: Fri Feb 15, 2008 8:54 pm
by sanger
Im installing a rock toy ring after i bent the short side arm. I have reinforced the long side arm and will be reinforcing the short arm with 1/2 inch solid bar around the perimeter. Just want to get a visual and how people have welded their rocktoy rings as mine is bolted to the outside of the caseing (no splitting the case} so thier is a fair gap between ring and arm.
Post up some pics if you got them. Would help me out bigtime.
Cheers sanger
Posted: Sat Feb 16, 2008 8:28 am
by get it up there
hey mate... pm me your e-mail addy please, i'll send you some pics of my set up
Posted: Sun Feb 17, 2008 2:11 pm
by NIK
I dont have any pics but we just bridged the gap with some flat and welded it up.
Nik
Posted: Sun Feb 17, 2008 9:10 pm
by sanger
Thanks for the help guys but got it sorted today tomorrow onto making a bucket to protect the t-case and weld it to the arms. Sort of like a homemade mighty kong.
Posted: Sun Feb 17, 2008 10:27 pm
by MUD-PIGSIERRA
I re-made the short bracket and allowed for a bracing to another point but Ive changed that setup now..............................
Posted: Mon Feb 18, 2008 5:54 pm
by sanger
Got it done. !/2 inch solid bar around perimeter of short arm and box tube centre gusset. The long arm was reinforced with 40x40 rhs. Rocktoy ring is a great bit of gear thanks chris
.
Also my skid plate now pics up a rear hole underneath the rear output so it should be solid enough to keep me out of trouble for a while.
Posted: Mon Feb 18, 2008 8:11 pm
by muz_ook
do you have any colour other than flat black in your shed sang???!!!!
Posted: Tue Feb 19, 2008 8:51 am
by sanger
muz_ook wrote:do you have any colour other than flat black in your shed sang???!!!!
Nope thats all the colour i need muz. Looking forward to this weekend. See u then mate.
Posted: Wed Feb 20, 2008 12:46 pm
by Roctoy
looks beffy as sanger!
cheers Chris