Page 1 of 1
fixing my patrol
Posted: Tue Feb 19, 2008 8:04 pm
by big lux
hay a stuffed the studs on my frnt hub the other day so ive decied to reseal everything else while ive got it apart. ive got it down as far as the cv joint so the axel is still in and stuff is there a seal behind the cv where the axel runs into the houseing and if there is how do i get the axel/ cv joint out.
Posted: Tue Feb 19, 2008 8:05 pm
by pongo
pull
Posted: Tue Feb 19, 2008 8:42 pm
by Chook350
should be to flat sections on the outside of the cv, line them up wif the swivel hub bearings and pull, be careful of dags of steel inside, like razors on ur fingers
Posted: Wed Feb 20, 2008 4:32 pm
by big lux
arr cheers pull workes just wana to be shore before pulling to hard. how much grease do i pack everything with. im gessing i pack the bearing cv joint and free wheeling hub?