Page 1 of 1
Black Canister - What is it
Posted: Tue Feb 19, 2008 8:38 pm
by rogerramjet
Greetings all
There's a black canister under my hood in the way of where I want to put a second battery, it has two hoses connected to it, one labelled "to tank" and the other "purge".
What is it? Can I get rid of it?
Posted: Tue Feb 19, 2008 8:40 pm
by PJ.zook
Its the charcoal canister, simply move it to wherever you want and extend/shorten hoses. Try to keep it on the same horizontal plane though, ie dont mount it right at bottom of firewall or right at top, keep it on same level if possible.
Just bolt it to the side of youre new battery holder, thats all i did.
Posted: Tue Feb 19, 2008 8:46 pm
by rogerramjet
Ahh yes, cheers PJ.
I am a not a great handyman, do i just drill into the firewall anywhere where there is space? Any issues with rust? How to I put thread into the new holes or should I use one of them butterfly bolt things which fold out once inserted?
Posted: Tue Feb 19, 2008 8:50 pm
by PJ.zook
There are many ways of doing it including the ones you just mentioned, just make sure you check whats on the other side of the firewall before drilling. If it were me i would drill 2 holes and used rivnuts, but you need a special tool to fit them. Also dont put canister too close to exhaust manifold.
Posted: Tue Feb 19, 2008 9:00 pm
by nicbeer
bolts through firewall. easy to get to under the dash
Posted: Tue Feb 19, 2008 9:29 pm
by outback
what does it do exactly?...couldn't find anything in the bible...obviously filters...but what?
Posted: Tue Feb 19, 2008 9:39 pm
by Harb
It absorbs all the petrol fumes coming from the various things that have petrol in them instead of venting the fumes to the atmosphere....
When you start the engine the idea is it sucks them in and burns them harmlessly..........
Posted: Tue Feb 19, 2008 10:28 pm
by alien
if thats what it does then mine doesnt work =) fuel smell just comes out the exhaust on cold mornings when heavily choked... lol
Posted: Tue Feb 19, 2008 10:41 pm
by Harb
Posted: Tue Feb 19, 2008 11:23 pm
by MART