Sticky switch?
Posted: Wed Feb 20, 2008 6:39 pm
Hi all, I have a 96 coily with a small problem. The 4WD light flickers on and off when in 2 WD and I was wondering if it is a sticky switch and if so is there an easy fix?
BP
BP
Page 1 of 1
Posted: Thu Feb 21, 2008 2:38 pm
Sounds more like a wiring problem, maybe a broken wire earthing out? It's easy enough to pull the switch out to check it in case, and while you are there check all surrounding wires.
Posted: Thu Feb 21, 2008 4:06 pm
Thanks. I gather then that the switch is soewhere near the shift stick? I have the Haynes manual but can't seem to find the info that I need.
Posted: Fri Feb 22, 2008 7:34 am
Yeah, it is on the back of the transfer case somewhere. There should only be one switch. I've never even bothered to look at mine so i couldn't tell you where sorry
Posted: Mon Feb 25, 2008 1:40 pm
Thanks heaps
Time to do some exploring.
Time to do some exploring.
Posted: Mon Feb 25, 2008 9:54 pm
Hey mate , switch should be just in front of the 4wd selector , it is shown here with selector missing and is at the right far edge of the photo , Cheers Paul.
