Outer Limits 4x4 Board

Hi guys i am putting a bullet super charger on my 4.5lt 100ser. has any body done this , if so any problems pop up.

Thanks Steve

let you know next week, have a vortech V2 here to bolt on my 80 i just picked up.

Big thing is timing control, and for tuning a microtech, or similar may help depending on the power rq.

We are shooting for 10 psi, and around 200 rwkw, and 5000-6000Tn @ wheels, as torque will be our focus more than power, with which comes economy.

I will run 2 tunes, one for 91 ron and one for 98 ron, and will carry a std intake hose so i can drop the belt, and go to limp home with the loom adaptor to plug the std computer back in should it fail in remote areas, like the Madigan etc we have planned for this truck.

3" lift, with 12" stroke shocks all round went in yesterday, and 37's on 17 x 9's as well.

Thanks for info ,good idea about spare hose , will arsk about getting home if some thing goes wrong. the bullet charger comes with piggy back ecu. What made you go for a vortec charger.

it was a complete kit of a smashed 80 same year as mine, couldnt say no for $2k with BIG stainless exhaust.

Was going to turbo mine, as I had a turbo intecooled 4.5 80 before, and was happy with it, but as this is a basher on a budget, the V2 won

Can,t go wrong for 2 grand , give me a yell how it goes.

There's a 100series 4.5 on ebay now with a superchager on it