Outer Limits 4x4 Board

Just finished making up a new bash plate from checkerplate for my hilux, Does it require holes for ventilation to the engine and gearbox?

Depends weather you want water and shit gushing up through the holes when you do creek crossings or mud ect.. My mate had an alloy one like that and all it did was hit shit and bend and become a menace. Steel is a must if you intend on the bush, or dont run one at all. If its more of a show pony lux, i would just leave it as is. If it will be used as a bash plate it wont hold up. If its more show pony plate it will do the job fine with or without holes

I'm actually in the process of making one up for my 2000 lux.

I'm using 3mm steel plate, and the plan is to unpick the spot welds on the original bash plate, and fold and weld the new plate to the old braces. As for air vents, a couple of 30mm holes with some stainless mesh should do the trick. I don't know if they NEED to be there, but as for mud and stuff, well the factory ones have holes and it's never been an issue before.

If you do enuf seious bashin, you will no that wud will get in and will stuff altinators and starter motors, not to mention everything else

Yeah it'll find a way around even if it doesn't have holes i'd leave it it looks purty if it does and track work i don't think it'll last teribly long

Lux_89 wrote:If you do enuf seious bashin, you will no that wud will get in and will stuff altinators and starter motors, not to mention everything else

Dude your using a computer not a phone, u have a key board fuking use it. That shite pisses me off

jeep97tj wrote:

Lux_89 wrote:If you do enuf seious bashin, you will no that wud will get in and will stuff altinators and starter motors, not to mention everything else

Dude your using a computer not a phone, u have a key board fuking use it. That shite pisses me off

did you proof read yours.

i dont have air holes in mine, never had any probs. made out of 3mm steel plate with 5mm stips to which the plte is welded which bolt to the original holes.

jeep97tj wrote:

Lux_89 wrote:If you do enuf seious bashin, you will no that wud will get in and will stuff altinators and starter motors, not to mention everything else

Dude your using a computer not a phone, u have a key board fuking use it. That shite pisses me off

DUDE, your tellin me, read your own farking shit be ya blast others. It pissssssssssssssssssssses you off to see ppl skipping a few letters. You got dramas DUDE.

jeep97tj wrote: Dude your using a computer not a phone, u have a key board fuking use it. That shite pisses me off

baawwaaaahahahaha

this will be locked any minute

that piece above the alloy bash plate looks like a baking tray.

try making it closer up, only reason id put holes in it was to drain water out and the shit

the piece above the bash plate is stainless plate with holes in , after the body lift there was a big hole . There to stop stuff going up into the radiator.

Sic Lux wrote:

jeep97tj wrote:

Lux_89 wrote:If you do enuf seious bashin, you will no that wud will get in and will stuff altinators and starter motors, not to mention everything else

Dude your using a computer not a phone, u have a key board fuking use it. That shite pisses me off

did you proof read yours.

Lux_89 wrote:

jeep97tj wrote:

Lux_89 wrote:If you do enuf seious bashin, you will no that wud will get in and will stuff altinators and starter motors, not to mention everything else

Dude your using a computer not a phone, u have a key board fuking use it. That shite pisses me off

DUDE, your tellin me, read your own farking shit be ya blast others. It pissssssssssssssssssssses you off to see ppl skipping a few letters. You got dramas DUDE.

sloshy wrote:

jeep97tj wrote: Dude your using a computer not a phone, u have a key board fuking use it. That shite pisses me off

baawwaaaahahahaha

this will be locked any minute

I hate to carry this on and waist room in your topic rob-hilux but to the others try and spell correctly what i have spelt wrong and post it up.

i suspect its the "u" and the "fuking" (altho i cant see a way around the last one). could even be the "shite" but i see shite as a word in itself so i dont think warrants being corrected



now my opinion on the subject:

SHUT THE FARK UP AND GET BACK ON TOPIC!!!

jeep97tj wrote: I hate to carry this on and waist room in your topic rob-hilux but to the others try and spell correctly what i have spelt wrong and post it up.

shit

For tech wise i'd say do horizontal slots not just holes
Macca81 has the rest covered