Page 1 of 1
MQ / MK Chassis & Spring hanger width
Posted: Tue Feb 03, 2004 8:14 pm
by DaveS3
Sorry guys crap question as i dont have access to a mq/mk around here!
Can anyone help us out and measure up their car??
What is the width of the spring hanger?
What is the distance between the chassis rails? (does this differ from front to back?
THanks guys
Posted: Wed Feb 04, 2004 10:12 am
by V8Patrol
What is the width of the spring hanger?
Which bit .... front of the front set or rear of the front set or rear of the rear set or front of the rear set ????
Posted: Wed Feb 04, 2004 6:22 pm
by DaveS3
Sorry mate,
* Width of the front of the front
* Width of the Spring pack at the centre of the pack
* The distance between the chassis rails
Is that a better explanation>???
Posted: Thu Feb 05, 2004 9:11 am
by V8Patrol
The measurement of the front spring hangers is....
775mm
Taken from outside to outside as in the following pic
The center of the front spring pak measurement I took from the spring paks centre bolt to centre bolt... IE : centre to centre.
Centre to centre = 735mm
The width of the leaves in the paks is 60mm
Posted: Thu Feb 05, 2004 9:17 am
by V8Patrol
Front Chassis measurement is ....
765mm
measured from outside to outside
Posted: Thu Feb 05, 2004 9:19 am
by V8Patrol
Rear Chassis measurement is ....
1075mm
measured from outside to outside
Posted: Thu Feb 05, 2004 6:22 pm
by DaveS3
Thanks V8Patrol, exactly what i am after
Dave
Posted: Fri Feb 06, 2004 9:52 am
by V8Patrol
ya welcome!