Outer Limits 4x4 Board

Posted: **Sat Feb 23, 2008 1:18 am**

Anyone know where I can get a set of these puppies from in OZ?

Peter

Posted: **Sat Feb 23, 2008 1:29 am**

Any engineering shop with a lathe can make some of those for you.

Posted: **Sat Feb 23, 2008 6:44 am**

Posted: **Sat Feb 23, 2008 6:04 pm**

longlux wrote:http://www.angelaircraft.com.au/toolsgr ... ipment.htm

I've seen these before. They are used for counter sinking alloy sheet for rivet heads when skinning aircraft. WAY too small for what I want.

Posted: **Sat Feb 23, 2008 7:00 pm**

besides making them - which is what I did.

www.polyperformance.com - they will send you the JMR ones like you pictured.

Posted: **Sat Feb 23, 2008 7:07 pm**

I can supply them. I use Light Racing dies. They come in sets of 3,5,7 dies, or they can be bought individually.

brooksy

Posted: **Sat Feb 23, 2008 7:22 pm**

brooksy wrote:I can supply them. I use Light Racing dies. They come in sets of 3,5,7 dies, or they can be bought individually.

brooksy

What sort of prices do these sets go for? PM me if you want.

Posted: **Sat Feb 23, 2008 7:25 pm**

brooksy wrote:I can supply them. I use Light Racing dies. They come in sets of 3,5,7 dies, or they can be bought individually.

brooksy

have you got any in stock?

Where to buy Dimple dies in australia??