Page 1 of 1
Engine Weights?? Anyone Know??
Posted: Tue Feb 26, 2008 9:24 am
by Remydog05
Anyone know the weights of the following?
Its normally quite easy to find th Power and Torque of engines but this might help some making decsions about conversions when talking to Engineers,etc.
G13A
G16B
4AGE
4AGZE
CA18DE
SR20DE
J20A
H20A
H25A
H27A
Posted: Tue Feb 26, 2008 5:34 pm
by germo
found this while searching for sr20det weights
A12 87 kg 192 lbs
A14 93 kg 205 lbs
L18 118 kg 260 lbs
CA18ET 118 kg 260 lbs
QR25DE 121 kg 267 lbs
CA18DET 128 kg 282 lbs
SR20DE 139 kg 306 lbs
SR20DET 149 kg 328 lbs
FJ20ET 166 kg 366 lbs (205 hp)
KA24DE 167 kg 368 lbs (est)
With Transmission:
SR20DET 490 lbs
RB25DET 667 lbs (280 hp)
VG30DET 589 lbs
Ford Small Block V-8 487 lbs
Chevy Small Block V-8 575 lbs
will be measuring weight of 1.3L when I pull it out and the weight of the sr20det when I put it in.
will do it in stages too, ie engine, then add gearbox then add transfer.
have a set of electronic crane scales at work that i will be using
ashley
Posted: Tue Feb 26, 2008 6:41 pm
by crackatinny
i bieleve the g13a is about 65-70 kgs and the g13b is about 75-80 kgs.
i was able to lift the g13a out of the car on my own (with difficulty), and can lift the entire g13b (with oil) into the wheelbarrow.
5 speed trans is 28 kg
Posted: Tue Feb 26, 2008 6:55 pm
by PJ.zook
Ive got a G13A, G16B and a sierra 5speed just sitting on the table if youre desperate to know.
Posted: Tue Feb 26, 2008 8:25 pm
by Remydog05
Thanks, great info.
Im pretty curious about J20A and H25A myself if anyones got a fairly acurate idea.
I would think that J20A would be simlar to a CA18DE but not as Heavy as a SR20. But the H25A would be as heavy or more than a SR20??
Posted: Wed Feb 27, 2008 8:57 am
by cj
G13BA 73kg
G16B 89kg
Posted: Fri Feb 29, 2008 2:39 pm
by Remydog05
Thanks CJ
Anyone got any more???