Outer Limits 4x4 Board

i just got a fj 40 soft top build date 4/78 it is at my old mans place at the moment and i have not seen it ,i only have on concern and that is it only has one id plate rivited to the fire wall which has fj40and then a whole lot of numbers after it,that number is on the old rego sticker,last reg in 06 but there is no plate with frame and engine numbers that my dad can see would or should a car as old as this have any more plates?

vin number should be on the outside of the drivers side front frame rail.. not sure if thats where they are on that year but worth a shot.

also not sure where you'd fine the engine number on a 2f.

do they have just one plate then? i wont be able to see the truck until easter and the old man is half blind but is just want to know how many plates should be on them so i can get rego for it, i checked out a 60 series and it had 2 ,mind you it is a 86 model

There is another plate riveted to the inside of the drivers front inner guard. Its a bit hard to find because its under or behind the battery. Seek and ye shall find......unless its fallen off of course.

Hy just had a look on my BJ42 (newer I know but might help - BTW it is raining) and I had one on upper RHS of firewall and another on LHS upper firewall just to right of brake booster.

thanks for the replys guys i guess i will have a good look at easter then talk to the rta to see if i can get it regoed

joshjeep wrote:i just got a fj 40 soft top build date 4/78 it is at my old mans place at the moment and i have not seen it ,i only have on concern and that is it only has one id plate rivited to the fire wall which has fj40and then a whole lot of numbers after it,that number is on the old rego sticker,last reg in 06 but there is no plate with frame and engine numbers that my dad can see would or should a car as old as this have any more plates?

alll you need is a chassis number and engine number, you dont need to have compliance plates afixed to the car for registration purposes.

Jes

jessie928 wrote:

joshjeep wrote:i just got a fj 40 soft top build date 4/78 it is at my old mans place at the moment and i have not seen it ,i only have on concern and that is it only has one id plate rivited to the fire wall which has fj40and then a whole lot of numbers after it,that number is on the old rego sticker,last reg in 06 but there is no plate with frame and engine numbers that my dad can see would or should a car as old as this have any more plates?

alll you need is a chassis number and engine number, you dont need to have compliance plates afixed to the car for registration purposes.

Jes

coolthanks guys

nice now get amongst it!
get rego and out wheeling it.

You should find the engine number on the block between the distributor and the firewall on the flat section of the casting. Thats where it is on all of mine..

and don't forget to post up some pics

how do i post pics?

PICS - http://www.outerlimits4x4.com/phpBB2/vi ... php?t=6162

you have to host them elsewhere - ie photobucket etc...then link to them.

here you go guys my new 40

Matt Black and Checker plate on the same 40.. too Much

i have not seen it yet but it will get a new paint job and alot of love i am told she needs it