Outer Limits 4x4 Board

Hey there ,
i drive a 94 rocky and basicaly the alloy side steps that came with it dont offer much protection and sit way to low , ive just recently bent the hell out of one on a rock step up at mount sugarloaf .
basicaly any companies you guys know of make rock sliders or very sturdy side steps for the rocky ? , if not ill have to fab some up if thats the case any one got any ideas of pics that can help me get an idea of design and how they did theres doesnt have to be pics of your rockys just rock sliders in general
thanks for any help , kemal

In general there is HEAPS of tech info kemal... have a search and you will find

I'll come show you mine soon mate, now that I have my car back.

I said you'd bend them stock ones soon

yer i bent it good, the passenger ones fine tho

My Driver's side one is all good!

We can make one decent pair anyway!

I got 2 lengths of 2 1/2 inch pipe which fit between front and back guards. I used lengths of 2 x 3/8 strap and cut 8 pieces about 2 inches longer than the height of the chassis rails. I used these to sandwich the chassis rail, with a bolt above and below the rail. I then just made up brackets from these plates to the length of pipe.
The have lasted about 5 years with no problems, even ok to lift the Rocky with a hi lift with them. I have only had one tree stump slip past them, crunching the sill.

hahahah sik

you have any pics buddy ?

Hey mate,

in this months 4wd monthly it tells you how to make an awsome set of rock sliders,

have a look,

Enjoy.....

http://www.outerlimits4x4.com/phpBB2/vi ... ck+sliders

Pics, bit of a write up, etc.