Page 1 of 1

1974 Model BJ40 Driver side door

Posted: Thu Feb 28, 2008 12:47 pm
by shoaldoll
Hi, I thought I posted this Question on the 27th but I cant see it anywhere. I'm a new user...so that probably explains everything.
I'll give it one more go & then shoot myself. ( I need a drivers side un-rusted door with winding window the type without a quarter window...for a 1974 BJ40 short wheelbase Landcruiser ) Cheers Dennis :)

Posted: Thu Feb 28, 2008 4:38 pm
by khany427
hey mate i got the window an all the winding stuff here. doors rusted though...
if you have no luck finding a door and the lower part of yours is rusted (as they usualy are) rare spares do the full lower part of the door. i think its the bottom 6inches or so.
just cut yours off and weld the new one on! easy! just remember to lay a wet rag over the door so the skin wont warp

https://rsp-secure.com/rarespares/

just select toyota, then landcruiser and its right down the bottom of the page

BJ40 Door

Posted: Thu Feb 28, 2008 6:34 pm
by shoaldoll
Hi, Thankyou for your offer...but I shoud have said that I already had all the bits that go with the door. I will contact rare spares as you suggest & see how I go getting the lower section & also thankyou for the welding tip.
Cheers Dennis