Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra Clutch - Will this fit

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Sierra Clutch - Will this fit

Post by Hybrid »

Like an idiot I just put a bid on this clutch without really checking it out. I assumed that it being for a g13ba it would suit my 91 sierra but no I notice inthe description it says 84-89 then 97 on. I'm thinking I better pull my bid.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... =p3907.m29

John
Top
Posts: 242
Joined: Tue Oct 09, 2007 9:54 pm
Location: Brisbane

Post by ScrawnC »

It should fit but the quickest way to find out is to find what motor you have in yours. Check the eng number on the block or plate on firewall.
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

Yeah I would have thought it would fit but now his description has thrown me. Being a 91 I've always assumed it is a g13ba. I can't go off the compliance becaue the car was stolen before I owned it and it has no plate. I can't see the engine number stamped on it as I'm at work.
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

All good. Messaged the guy and he said it may fit but without knowing the specific spline diameter of mine he's not confident to send it. Thanks for the help.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest