Outer Limits 4x4 Board

ok i came up with a few ides when searching...but im wondering if anyone knows 1st hand what sorts/brands etc fit...as there isnt much room at all !!!

search came up with using commo ones...but i wouldnt mind hearing from someone which can say a definete 'yes they fit' before i go out & buy.

Luke

you can get them custom made for not much

would the universal fit, block huggers fit? i have them on mine, they are made by pacemaker. or theres cheaper versions from genie.

308LUX i wouldnt worry to much if ya only chasing horsae power as standard 308 manifold flows really well and you wouldnt b gaining a hole heap that is unless u want a different note so im told BTW was from a bloke who runs a 900hp dyno shop so ill take his advise as being O.K IM getting about 260-270hp and that should be heaps if yours is standard you would b somewere around 250hp and might if ya lucky pick up 10hp with extractors but it all depends on how they flow

4sum4 wrote:you can get them custom made for not much

I was quoted $150 per cylinder for custom pipes for my 3.8L V6 Hilux.

I bought a set of V6 extractors & modifyed them to fit the Hilux myself.

4sum4 wrote:you can get them custom made for not much

I was quoted $150 per cylinder for custom pipes for my 3.8L V6 Hilux.

I bought a set of V6 extractors & modifyed them to fit the Hilux myself.

gtwebbie wrote:308LUX i wouldnt worry to much if ya only chasing horsae power as standard 308 manifold flows really well and you wouldnt b gaining a hole heap that is unless u want a different note so im told BTW was from a bloke who runs a 900hp dyno shop so ill take his advise as being O.K IM getting about 260-270hp and that should be heaps if yours is standard you would b somewere around 250hp and might if ya lucky pick up 10hp with extractors but it all depends on how they flow

yeh sounds like good advice webbie...is your dyno reading from the engine or rear wheels ??

i also found out that the commo try-Y style extractors which come in 2 parts aparantly fit perfectly

270 at back wheels I wish no at the fly wheel

Kev80 wrote:

4sum4 wrote:you can get them custom made for not much

I was quoted $150 per cylinder for custom pipes for my 3.8L V6 Hilux.

I bought a set of V6 extractors & modifyed them to fit the Hilux myself.

Farken hell thats heaps I was going to get my custom for $400 ,just bought them of the shelf.

308 LUX if ya gunna get some give rod hatfeild a ring as im told he knows a bloke who is a wiz at customs but without the big $$$$ price tag

':cool:' sounds good