Outer Limits 4x4 Board

8) - ring 3344 1181 - uses 22mm tie rod ends

Here is one that has been used and abused.
This is the 35mm version which is also a custom length with 80series Tie Rod ends. These are Cro-Moly and as you can see by the pics have taken a flogging and it is still dead straight.There is a mark on the front of the diff housing from it being pushed right back but it has still returned to original.

Richard can make these to suit just about any set up. Just call him and tell him what you want and the measurments.

RUFF
is the tube u r talkin about, is it 35mm od, id or nb.
................. Webbie.........

So what does Richard charge for such a fine tie rod ? Say standard length for a hilux ?

gtwebbie wrote:RUFF
is the tube u r talkin about, is it 35mm od, id or nb.
................. Webbie.........

It would be OD as it doesnt have an ID it is solid Cro-mo.

Brad you would have to call him on a price as i cant remember what i paid.

Brad wrote:So what does Richard charge for such a fine tie rod ? Say standard length for a hilux ?

They come with no paint on em, so u can paint them any color u want. Don't take too long to fit em either, and your best to call RICHARD for a price.

I have put one of these on my 4 runner - well worth the $'s

I sort of had a reason to put it on