Page 1 of 1
engineer in newcastle
Posted: Thu Mar 13, 2008 8:51 pm
by jungles
hey all had alittle seach couldnt find much just curious if anyone knows of a newcastle engineer to get all this done and how much it would cost roughly.
Ruf, extended brake lines, big gaurd chop, 1l transfer in 1.3, new front hoops, my rear suspesion running 45 angle and 31 mtrs
any help would be much apprieciated
thanx jimmy
f
Posted: Thu Mar 13, 2008 10:34 pm
by Pyrotech
there are two that i know of, Athol at cardiff, and Don at garden suburbs.
do u have any pix of your build?
Posted: Fri Mar 14, 2008 4:15 pm
by NIK
I used Don VTOL he was good cost double for the ruf as he has to "prove" the springs are good enough for the front. Mine specifies howmany leaves per pack! Ithink $600 for whole vehicle.
Nik
Posted: Mon Mar 17, 2008 9:29 am
by ZUKPOWER
I've been to Athol a few times
Mullen Automotive Engineering
0414685537
Posted: Tue Mar 18, 2008 7:47 pm
by scottyde
in the process of putting a 4agze in my zook with soa conversion and 1 inch body lift, also in newcastle will i have any issues with engineering ?
can any one recommend a engineer ?
Posted: Wed Mar 19, 2008 4:46 am
by NIK
Before you go any further talk to an engineer or you may have to redo things to there specs but Id say overall if done right it should be engineerable.
Nik
Posted: Wed Mar 19, 2008 8:38 am
by eXc
this is a list from years ago
Transport Industry Consultants Cardiff (02) 4956 5466
Mullen Automotive Cardiff (02) 4956 8030
I also have a friend that gets minitrucks engineered in newcastle...I'll see if i can find out who he uses
Posted: Mon Mar 24, 2008 9:08 pm
by jungles
thanx heaps ill get it happening soon and hopefully see use all out wheelin
cheers jimmy
Posted: Mon Jul 13, 2009 7:44 am
by dmould66
IM BRINGING MY SWB VITARA TO NSW FROM UK, ITS GOT 2" BODY LIFT,1.5" SUSPENSION LIFT AND 31" MUD TYRES, BELIEVE IT NEEDS ENGINEERING, ARE THESE MODS ENGINERABLE. ANY ADVICE APPRECIATED[/img]
Posted: Mon Jul 13, 2009 9:06 am
by mnemonix
Get athol mullens to certify it. You'll never have a problem. His reputation speaks for itself.
As for Werner at TIC, his reputation speaks for himself, and many people have some quite unfriendly thinks to say about his work.
ie: sight unseen dodginess.
Posted: Mon Jul 13, 2009 10:42 am
by lockdup
Hi guys,
Im after the same info. I need a approx cost to get SOA, 2" BL and 31" tyres engineered. It has all been done professionally. Anyone have an idea?
Sorry about hi jack but i dont want to start a new thread
Posted: Mon Jul 13, 2009 2:42 pm
by lump_a_charcoal
Athol Mullen
24 Newcastle St Cardiff NSW 2285
ph/fax 02 4956 8030
mob 0414 685537
Posted: Tue Jul 14, 2009 12:55 am
by DEADZOOK
tic is long gone, rta banished him a good 6 months ago and vtol from what i hear is either under rta investigation or is in lock down- you will have to ring to confirm that tho.
Posted: Tue Jul 14, 2009 5:56 am
by NIK
I spoke to a mate that works in the rta (yeah I know I didnt actually ring so this may be b/s) but he said vtol is still on the list of approved engineers.
Nik