Page 1 of 1
arggg wheel bearings
Posted: Fri Mar 14, 2008 4:27 pm
by St Jimmy
Just had to get new rear wheel bearings l/r $100.00 the set is that a good price .But I WON'T GET THEM TILL MONDAY arrrrgggggg as they had non in stock at CBC bearings . Think i'll pull the t.fer case out and put the twin-sticks in while I'm at it any secrets in tacking the case apart
.BONER
Posted: Fri Mar 14, 2008 5:45 pm
by BlueSuzy
Your wheel bearings seem to be pretty good for $100, is that 1 set or both left and right?
This link is a how to install for my 6.5.1 gears, but you should be able to go off it with out the new gears
It shows the things that you have to watch for etc. Pretty easy but if you know what your doing with a tool in your hand
http://www.trail-gear.com/tech/zuk65gears/index.html
Posted: Fri Mar 14, 2008 5:49 pm
by St Jimmy
Both sets $45.45 a side . Thanks for the link
. boner
Posted: Fri Mar 14, 2008 5:51 pm
by BlueSuzy
yeah seems to be pretty good, mine were bout 70 a side! but it pays to shop around 1st
Posted: Fri Mar 14, 2008 6:01 pm
by GRPABT1
Posted: Fri Mar 14, 2008 6:09 pm
by St Jimmy
Thanks guys will look at it tomorrow
Posted: Sun Mar 16, 2008 10:43 am
by St Jimmy
OK the wheel bearings are sealed and a person on another site . Told me to take the sealing rubber out on the inside ? has anyone done this if so why as i thought that they were sealed for a reason. boner[PS the old ones were sealed to as well so leave them alone or remove seal ]