Page 1 of 1
Gti Exghust into a sierra which one?
Posted: Tue Mar 18, 2008 9:03 pm
by JacZook
Hi Guys
I have a zook with a Gti engine but with stock manifold, I am after a set of extractors, do 1.6lt efi extractors fit or 1.3 carb extractors, or do I need them made.
thanks ahead
jaczook
Posted: Tue Mar 18, 2008 9:35 pm
by Gwagensteve
GTI head should be round port and might match 16V Vitara/Baleno, but I don't know this for sure. 99% they aren't going to be the same as carby.
Steve.
Posted: Tue Mar 18, 2008 10:02 pm
by cj
This shows you the variuos exhaust port shapes and dimensions.
http://www.rage.co.nz/flanges/suzuki.pdf
Posted: Tue Mar 18, 2008 11:39 pm
by GRPABT1
I bought a geanie header to suit a 1.3 sierra and had the GTi flange welded on which any exhaust shop who sells pace maker gear could do as they sell the GTi flange. Works well too.
Posted: Tue Mar 18, 2008 11:48 pm
by GRPABT1
Oh and btw besides port shape they are all different bolt pattern, sierra extractors have virtually the same pipe position though which suits the GTi flange well.