2" OME Lift Kit into Jimny
Posted: Mon Mar 24, 2008 7:45 pm
I put in my 2" (40mm) Old Man Emu lift kit into our Jimny last weekend, and took in out to Inskip over Easter. After owning the jimny for nearly 2 years now, and after taking it on some "relativly" tough tracks both before and after lift, i can say that it is a shame Suzuki didnt make them like this from the factory.
The Jimny is our only car at the moment and as such we didnt want to compromise road handling around town. Also, as we often load up the roof cage on camping trips, we didnt want to compromise stability on the highway. However, since fitting the lift kit i can say there is a definate IMPROVEMENT in ride quality both loaded and unloaded, and the suspension has removed the bounce that we used to experience on rough tracks. Lateral stability on the highway has not been adversly affected, and if anything has been improved due to the suspension being more progressive in corners.
All in all we are extremely happy with the kit, and have never been happier with the car!
Below are some pictures of the car both pre lift and post lift.
The Jimny is our only car at the moment and as such we didnt want to compromise road handling around town. Also, as we often load up the roof cage on camping trips, we didnt want to compromise stability on the highway. However, since fitting the lift kit i can say there is a definate IMPROVEMENT in ride quality both loaded and unloaded, and the suspension has removed the bounce that we used to experience on rough tracks. Lateral stability on the highway has not been adversly affected, and if anything has been improved due to the suspension being more progressive in corners.
All in all we are extremely happy with the kit, and have never been happier with the car!
Below are some pictures of the car both pre lift and post lift.