Page 1 of 1
1.3 L electronic dissy in 1L
Posted: Tue Mar 25, 2008 7:21 pm
by zukitrev
Does 1.3 L electronic dissy fit in 1L f10a. I searched, Thanks Trev
Posted: Tue Mar 25, 2008 7:39 pm
by Gwagensteve
Yes, I have done it, but I think I stuffed up where I pulled the vacuum from. I have learned that depending on where the vacuum comes from (in relation to the carby) some strange things can happen.
Idle was much much better but I couldn't ever seem to get enough advance in- It would bog until it was really revving.
It's a bolt in though.
Steve.
Posted: Wed Mar 26, 2008 6:31 am
by zukitrev
Thanks Steve, will get one and try my luck