Page 1 of 1
Wheel Offset Question
Posted: Mon Feb 09, 2004 3:45 pm
by SteveC
I am going to look at some second hand wheels.
What should the offset be to fit 33" MTR tyres on an 85 Rangie?
Where is the offset measured?
Thanks in advance
Steve
Posted: Mon Feb 09, 2004 6:44 pm
by HSV Rangie
Off set required>
Back space 100mm.
Measured from back of wheel to wheel mounting surface.
Michael.
Posted: Mon Feb 09, 2004 7:17 pm
by Smithy jnr
100mm for 8 inch rims,
75mm for 7 inch
Posted: Mon Feb 09, 2004 9:32 pm
by mickrangie
Smithy jnr wrote:100mm for 8 inch rims,
75mm for 7 inch
I have 100mm on Disco rims (7") Is that bad?
Posted: Tue Feb 10, 2004 6:38 am
by Bodge
mickrangie wrote:Smithy jnr wrote:100mm for 8 inch rims,
75mm for 7 inch
I have 100mm on Disco rims (7") Is that bad?
Sorry mate you are stuffed - send them to me and I will get rid of them for you - its the best you can hope for...
Posted: Tue Feb 10, 2004 7:19 am
by HSV Rangie
100 mm back space on 7 inch not bad.
with 7 inch just allows you to increase wheel track buy another inch per side.
But you could give them to me if it stresses you
Michael.
Posted: Tue Feb 10, 2004 8:39 am
by mickrangie
oh yeah i'll just give both sets away to the highest bidder....
lets start at 2k for 10 disco rims....
mac 5 rims
Posted: Wed Feb 11, 2004 6:27 pm
by Rangee
i have a set of mac 5 rims that are 9.5 inches wide and the back space is 130mm ... is that ok
Rangee
Re: mac 5 rims
Posted: Wed Feb 11, 2004 9:31 pm
by landy_man
mac 5 rims
Posted: Thu Feb 12, 2004 7:55 am
by Rangee
email me and i will send a pic of them, i am going to have them re sprayed Gold to match the gold bash plate and gold RR lettering
mac 5 rims
Posted: Thu Feb 12, 2004 7:56 am
by Rangee
