Page 1 of 1
body lift
Posted: Wed Apr 02, 2008 6:34 pm
by want to be a wylie
hi all i have just done a 50mm bl in a gq and was wondering
about the clearance issues on low range
so what to do
cut the floor clear
or how hard is it to remove the sticks and put the oxy on them
and bend them a little
or in the hydraulic press
if this is a bad idea just let me know
or is there another option
Posted: Wed Apr 02, 2008 7:15 pm
by ORSM4B
Mate what vehicle did you do the body lift.
As with my patrol did 50mm lift and only had to cut the floor for the 4wd lever for low range...
Cheers Chris.
P.S if you have to cut the florr for 2 and forth the body is not sitting right.
Re: body lift
Posted: Fri Apr 04, 2008 10:16 am
by roverrat
want to be a wylie wrote:hi all i have just done a 50mm bl in a gq and was wondering
about the clearance issues on low range
so what to do
cut the floor clear
or how hard is it to remove the sticks and put the oxy on them
and bend them a little
or in the hydraulic press
if this is a bad idea just let me know
or is there another option
You can lengthen them.
Posted: Fri Apr 04, 2008 5:19 pm
by cooki_monsta
just unbolt the rubber surround, its only the surround that stops it from going into 4L
Posted: Fri Apr 04, 2008 6:06 pm
by want to be a wylie
right thanks all
will see how we go with it
cheers chris
Posted: Fri Apr 04, 2008 6:15 pm
by polly
cooki_monsta wrote:just unbolt the rubber surround, its only the surround that stops it from going into 4L
yep this is what I did... just had the seats and vinal flooring out then unscrewed the cover and moved it back as far as possible, then screwed it back on.
no problem