Page 1 of 1
weird noise 80 series
Posted: Thu Apr 03, 2008 10:22 am
by Jason V
Hey guys, i have just put in a 3" lift kit in my 80 but when ever i come off the accelerator in 4th or 5th gear anything about 60ks it makes a weird grinding noise sounds like its comming from right under the gear shifter?
Posted: Thu Apr 03, 2008 12:50 pm
by rayndeb
its not your dshaft unis or front hitting swaybar
Posted: Thu Apr 03, 2008 2:25 pm
by sniper
apparently a part time kit eliminates this. I too have it with my 6" lift. My mate had it with his 4" lift, part time fixed it for him.
I assume its increased backlash or sometihng
Posted: Thu Apr 03, 2008 2:37 pm
by dow50r
It is the angle of the front unis tat do it, check it out and ou will see the front shaft is straight at the diff and bent on the uni at the gearbox...try dropping the crossmember 10mm and packing it might fix it might not....the best fix is a d/cardon shaft from a rear hilux dualcab...they fit once shortened. or as above with the part timer
Andrew
Posted: Fri Apr 04, 2008 8:21 am
by icrawl
i to have an 80 4" lift the noise ur hearing is coming from ur front tail shaft hitting the sway bar or ur steering arm rubbing on trailing arms put castor correction plates in will fix prob its nothing to do with ur g/box
Posted: Fri Apr 04, 2008 6:34 pm
by scottmcguinness172
mate just put a part time kit in it ya get more power better economy it steer so much better ur front diff isnt spinning and they only take 4 hours to fit.
Posted: Fri Apr 04, 2008 7:11 pm
by sniper
ooww I was close andrew
Posted: Fri Apr 04, 2008 9:29 pm
by 80's_delirious
It could also just be the alignment of the unis on the front shaft. I had similar noise, I marked both sides of the slip yolk then pulled one end of the front shaft out and rotated it 90degrees and it definitely improved it with no $$ spent