Outer Limits 4x4 Board

Posted: **Fri Jan 10, 2003 7:46 pm**

could some one ans this for me please

i have low beam and i have flash high beam but i do not have perminant high beam. When i check the pallarity of the connection @ low beam i have power at the left source and a earth of the right side, when i use the flasher i have power from the top source and a earth at the right side, when i use high beam i have poser from both the left and the top and a earth from the bottam.

Now why dont my high beams work
(globs are good)

Posted: **Fri Jan 10, 2003 7:48 pm**

possibly your actual combo switch !!!!
hard to say with out testing !!!!!

Posted: **Fri Jan 10, 2003 7:54 pm**

is there any way of actually testing the switch i had a look at it and well i rerally didnt know what the hell i was looking at

Posted: **Sat Jan 11, 2003 8:56 pm**

bet ya not getting ya twin light set now hey ! 8)

Posted: **Mon Jan 13, 2003 10:17 am**

I had a similar problem in my 60 with an aftermarket headlight relay. Finally tracked it down to a bad connection in the right high beam, resulting in the high indicator in the dash not working, which stuffed everything! Go figure. Toyota do some funny things with their switches.
Solved the problem with a black box from Pirahna, which plugged into the original right hand headlight wiring.

Outer Limits 4x4 Board

need help no hihg beam

need help no hihg beam

switch !!!