Outer Limits 4x4 Board

hey guys,

i recently made a boo boo and smashed up the drivers side rear brake light cover, cracked the assembly and bent the rear step. i should be able to fix the latter 2 however i would need to get al least a new plastic cover and was wondering if any of you lovely gentlemen/ladies had any lying around. I hear they are hard to come by. I have found a wrecker who can get (i assume) the assemby + cover to me for $60 but wantes to check here first.

also how hard is it to replace the rear duds with lights from a rocky to avoid this problem in the future and if its not hard does anyone have a set of them i could purchase and ship to sydney?

thanks alot in advanced.

You should also be able to use the rear lights from an F300 Feroza in the place of the blanks, just have to check whether they still ran the wiring loom in the later models.



$60 is good for a complete light... In the Newcastle area we couldn't find a wrecker that had any in stock. They also don't make aftermarket items to suit.

is anyone selling these by any chance??

i got some of them lights off a fourtrack(rocky) they are the same and will fit ryt in but the isnt a wireing loom there u will have to wire them up yourself

yeh the wiring isnt a problem but i was just wondering it anyone was selling some as the best i have found at a wreckers is $50 a side plus prob $15 postage or so......