Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sorry but another speedo cable question....
Sorry but another speedo cable question....
My speedo cable broke, so i replaced both the outer and the inner. and about 5 min later on the road it broke again.... is there something really obvious that i have forgot to do??? do u need to lubricate the cable or anything??? thanks guys
Sounds like something might be seized? Did the speedo work for a bit when you put in the new cable? A LITTLE bit of grease can help but that won't have caused it to break in that short a time. When you fit the new cable jack up the rear wheels and start the car, put it in gear and have a look/listen. Make sure you are on flat ground with axle stands too!
Who is online
Users browsing this forum: No registered users and 0 guests