Can you post up the Bolt torque [preferably in ft lbs] for the flywheel to crankshaft and pressure plate to flywheel bolts for a 1990 1HDT , thanks gazza.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bolt torque ,Flywheel to crankshaf for 1HDT, Please.
Moderators: toaddog, Elmo, DUDELUX
Bolt torque ,Flywheel to crankshaf for 1HDT, Please.
Cheers Blokes, I only have the yota engine manual.
Can you post up the Bolt torque [preferably in ft lbs] for the flywheel to crankshaft and pressure plate to flywheel bolts for a 1990 1HDT , thanks gazza.
Can you post up the Bolt torque [preferably in ft lbs] for the flywheel to crankshaft and pressure plate to flywheel bolts for a 1990 1HDT , thanks gazza.
Finally found flywheel to crank torque 1,300kgm-cm [real money 94 ft-lb or 127nm. ] after several times through engine manual.
Who is online
Users browsing this forum: No registered users and 0 guests