Outer Limits 4x4 Board

Guys any one fitted these to a GQ if so do they fine or are they too tight of a fit?

any one ?

I've got a pair in my GQ and they do fit.... just.

There's enough room for the factory console and enough space to move seat belt, handbrake, etc. but they must be in the perfect spot. I also had to mod the seat base and factory mounting (not a big job, just raise rear of outside mount by 20mm and then make up adaptor to fit seat base to mount).

I'll try and get a pic tonight.

Mavtd wrote:I've got a pair in my GQ and they do fit.... just.

There's enough room for the factory console and enough space to move seat belt, handbrake, etc. but they must be in the perfect spot. I also had to mod the seat base and factory mounting (not a big job, just raise rear of outside mount by 20mm and then make up adaptor to fit seat base to mount).

I'll try and get a pic tonight.

Cheers are they the sp2 or the sp12 as from the site the sp2 is 58cm across the shoulders as that was my main concern as both of these are smaller than the rally across the base

http://www.autotecnica.com.au/seats_3.html

They're the SP2BK from your link.

Dazz

Mavtd wrote:They're the SP2BK from your link.

Dazz

Thnaks Daz