Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
simple power steer?
simple power steer?
if anyone is interested in a simple and tuff power steer conversion let it be known here. if i get a lot of responses i will post some cad drawings of the setup.
Re: simple power steer?
ripper,joeblow wrote: let it be known here.
comon fellas show ya hands!
Here is a test to find whether your mission on earth is finished: If you’re alive it isn’t.
- Richard Bach
- Richard Bach
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Its cement two table spoons of cement and a glass of Milk and harden the F#@k up. Concrete is the finished product of adding water sand, gravel and the binder which is cement, the concrete has all ready gone hard.pubic wrote:give the kid a glass of concreet and tell it to harden up
Yes Im interested in the drawings for a a mates project would be much appreciated.....
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
What makes the cressida box better than a vitara one? The mounting pattern is pretty much the same so the labour to fit doesn't really look any different.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Looks good mate, nice detailed drawing. The cressida etc style box has been being used for a while, rocky roads kit is built around it...
http://www.rocky-road.com/powersteer.html
and the same install as joeblows drawing is here (although for vit box):
http://www.rocky-road.com/powersteer.html
Steve, going by the rocky road site (if its anything to go by) the cressida box is larger/stronger. Althouh I'm sure your aware, alot run the vit box with up to 36" tyres.
Joeblow, like steve said, Mounting wise looks to be exactly the same amount of work, if not more, sourcing lines etc to make fittings fit at both ends (pump to box).
If you pick up a complete setup out of a vitara, all the lines are a straight hook up from what I understand.
I'd still prefer to drill a 10mm plate & have it all bolt on/removable though, rather than drillng the chassis & cutting & welding in crush tubes, but that me, as I'm after a bolt on solution.
http://www.rocky-road.com/powersteer.html
and the same install as joeblows drawing is here (although for vit box):
http://www.rocky-road.com/powersteer.html
Steve, going by the rocky road site (if its anything to go by) the cressida box is larger/stronger. Althouh I'm sure your aware, alot run the vit box with up to 36" tyres.
Joeblow, like steve said, Mounting wise looks to be exactly the same amount of work, if not more, sourcing lines etc to make fittings fit at both ends (pump to box).
If you pick up a complete setup out of a vitara, all the lines are a straight hook up from what I understand.
I'd still prefer to drill a 10mm plate & have it all bolt on/removable though, rather than drillng the chassis & cutting & welding in crush tubes, but that me, as I'm after a bolt on solution.
Who is online
Users browsing this forum: No registered users and 67 guests