Page 1 of 1
New Tie rod ends
Posted: Tue Apr 22, 2008 3:33 pm
by loopy31
Hi Guys,
After destroying my tie rod and tie rod ends what is the best way to adjust so as to get optimum squareness of my tyres? Any advice would be appreciated
Cheers
Posted: Tue Apr 22, 2008 3:47 pm
by GRIMACE
I have found round tyres work much better.
No seriously, measure the distance between opposing tyres, from the front/leading edge of the tyre and do the same at the rear edge of the tyre.
Get this as close to the same as possible. then drive it somehwre and get a wheel allignment.
Posted: Tue Apr 22, 2008 4:10 pm
by RoldIT
GRIMACE wrote:I have found round tyres work much better.
No seriously, measure the distance between opposing RIMS, from the front/leading edge of the RIM and do the same at the rear edge of the RIM.
Get this as close to the same as possible. then drive it somehwre and get a wheel allignment.
Posted: Wed Apr 23, 2008 10:50 am
by loopy31
Square tyres now that would be fun!
Thanks for the advice
Cheers