Page 1 of 1

Rangie Maxi drive front axle

Posted: Sun Apr 27, 2008 2:09 pm
by Bog Hole
I am looking for a front maxi drive axle. The short side 24 spline both ends. Torn the end off mine on the weekend. :P

Posted: Sun Apr 27, 2008 2:29 pm
by cloughy
Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:

Posted: Sun Apr 27, 2008 2:30 pm
by Tim D
Look up

Hytuff engineering ?

Barry at carrara

He makes them.

Posted: Sun Apr 27, 2008 8:37 pm
by Bog Hole
I will have to check, I know that the end I tore off was 24 but I will have to check the end that goes into the maxidrive locker.


cloughy wrote:Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:

Posted: Sun Apr 27, 2008 10:49 pm
by cloughy
Bog Hole wrote:I will have to check, I know that the end I tore off was 24 but I will have to check the end that goes into the maxidrive locker.


cloughy wrote:Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:
If it was the CV end that snapped, it's likely its 23 spline, anyway, contact Hytuff engineering and you should be able to purchase 1, keep in mind, IF its an early maxi, it will be 28 spline at the diff centre, later is 24, so make sure you get the spline count right before you order :D

Posted: Mon Apr 28, 2008 6:09 pm
by Bog Hole
Cheers for that I going to pick the car up tomorrow.
cloughy wrote:
Bog Hole wrote:I will have to check, I know that the end I tore off was 24 but I will have to check the end that goes into the maxidrive locker.


cloughy wrote:Sure its not 24 spline one end and 23 spline the other? :D

How early is it? might be 28/23 :shock:
If it was the CV end that snapped, it's likely its 23 spline, anyway, contact Hytuff engineering and you should be able to purchase 1, keep in mind, IF its an early maxi, it will be 28 spline at the diff centre, later is 24, so make sure you get the spline count right before you order :D