Outer Limits 4x4 Board

Ok everyone ive had enough of the crapness of the standard zook seats and need to see what people have fitted to their rigs, post up some pics and any mods you had to do to the rails etc to make them fit - am looking for something with cloth trim as its more comfortable and that you can spend the day in wheeling without feeling shit when you get home!!

post em' up!!!

Custom mounts. Basic as... 6mm flat bar.

want33s wrote:[img]Custom mounts. Basic as... 6mm flat bar.

Legalness?

Comfy on long highway drives?

i have seats out of a nissan pulsar around 88-90 model. Very comfy, high sides so keeps you in, very easy to fit, few extra holes and thats about it.
Dont have any pics tho sorry.

PCRman wrote:Legalness?

YES. All engineer approved. Blue plated.

PCRman wrote:Comfy on long highway drives?

Very firm, you might even say hard.. Like a park bench actually ..
So not brilliant for L O N G highway trips but neither is a Zook (Especially mine.. 50km is about as far as it EVER goes on bitumen in one hit.)

I made my rails from 6mm flat bar like Want33s in my old zook. I used Honda CRX seats which I was very happy with. So happy, I pulled them out of that zook before I sold it so I can put them in the LWB.

want33s wrote:

PCRman wrote:Legalness?
YES. All engineer approved. Blue plated.

Nice, I must find out what hoops i have to jump through for new seats in WA. Prolly won't go for racing buckets but a nice set of fully adjustable buckets from a sedan would be nice. Subaru liberty seats are V. comfy but don't know about fit.

Was thinking of going to DIY wreaker with the seat dimensions and walk around the yard trying before i buy

want33s wrote:So not brilliant for L O N G highway trips but neither is a Zook (Especially mine.. 50km is about as far as it EVER goes on bitumen in one hit.)

I did Perth to kalbarri with a collapsed seat, new stiff OME suspension and a wild cross wind at easter. FUN FUN FUN

v840 wrote:I used Honda CRX seats which I was very happy with. So happy, I pulled them out of that zook before I sold it so I can put them in the LWB.

are they as tall/taller than the stock seat?

Here's mine Autotechnica Monza's


Unlike Want33's I removed the drivers seat rails to lower the seats to
match heights and keep weight low! as with want33's I used 6mm plate
but I ran 2 on top inline so seat wouldn't bunch up carpet then ran 2 from side to side underneath sorry no more pics tonight to dark n wet outside!

[/img]
Arrow shows third mount I removed!
SORRY FOR USING YOUR PIC WANT33'S BUT SHOWS RAILS BETTER!

PCRman wrote:

v840 wrote:I used Honda CRX seats which I was very happy with. So happy, I pulled them out of that zook before I sold it so I can put them in the LWB.

are they as tall/taller than the stock seat?

I set them up so that were more or less the same height as the OE seats (about an inch higher IIRC). I think I'll raise them a bit when I remount them in the LWB though for better over bonnett visibility.

seats look good so far keem them coming!!! im probably leaning towards a set of seats from a sedan or small car that are comfy as i dont like the idea of buckets digging into my legs on long trips - i did 280km of driving on sat from bris to LCMP, wheeling all day then home again and my seats threw me around all day!!!

wreckers idea sounds good so i can hunt around and see whats comfortable!! going to try pick up the newest ones i can from a late model car that are bolstered etc like buckets but not specifically aftermarket type bucket seats

ie i like the seats in my ss they keep my ass in place but something similar for the zook

Just remember that zook seats are very narrow and you may find that you cant fit the seats you just bought. Work out the maximum aloowable width of the seats before you go shopping.

noooooooooooooo i not bought anything yet , hence why im asking for input as to what others have fitted

has anyone used these cheapo seats http://cgi.ebay.com.au/BR-NEW-PRO-STEEL ... dZViewItem??

brendan_hh wrote:has anyone used these cheapo seats http://cgi.ebay.com.au/BR-NEW-PRO-STEEL ... dZViewItem??

yes VERY comfy for a bucket seat able to put a 5 point harness in it and cushions can be removed to clean

only thing i know of is they take a smaller diameter bolt (making it abit grey if its allowed to be approved or not ?) and need custom brackets like the rest

now im convinced to get one.... "sexy tapered edges" haha

Why are they $45 bucks? dont look too comfy more like padded go kart seat.....

plastic moued foam inserted around it easy to make / local i guess

i've got some no-name brand seats in mine that run on the original tracks... they look very similar to BOGFROGs Monza seats. i got them from "Regan" - used to have a white coily(?) and was in the fire brigade - he rolled his zuk and swapped the seats back over before handing it over for insurance... i snatched the seats up for $200ea (he paid $350ea from memory).

Build thread thingo below has pics where you can kind of see them - theyre vinyl and VERY firm... but MILES better than stock. They really hold you in. Long drives theyre not bad at all, probably better than the seats in my mazda 323 i reckon, less of a sore back cos they hold you so well. The vinyl is sweaty in the heat, but then so were the stock seats, and its a zuk... you're gonna be sweating anyway =)

brendan_hh wrote:has anyone used these cheapo seats http://cgi.ebay.com.au/BR-NEW-PRO-STEEL ... dZViewItem??

YES i have one sitting on the floor near me as they are not legal in Australia you can buy them but you cannot use them .No ADR STICKER on them you will get pinged if you use them and get pulled over by the rta.Or a bad cop so be careful if you buy them

Attach em to some rollers and they'd be a good office chair

We had these in the old zook.
were mod plated.
the seats

in the car

the passenger mount to bring it level with drivers side

from behind

Potter those seats look comfier and better than most buckets you see getting around - what are they? where abouts did you get them from?

i got GTI seats in mine and had them both bolted in in one night using original rails. looks very original and are very comfy.

The Autotechnica/Monza ones can be easily fitted the the original rails, you just need to drill two new holes and enlarge two existing holes. Only just clears the B pillar though

Potter what brand are those seats? theyre EXACTLY the same as mine (mounting hardware is too, although i didnt use it) - even the stitching pattern is the same... be interested to know what mine are for future reference =)

M1S3RY put up piccies

mick85 wrote:Potter those seats look comfier and better than most buckets you see getting around - what are they? where abouts did you get them from?

Not sure what they are my old man bought them off an ebay site, about $300 for the pair. they look comfier than they are but they aren't to bad, they are pretty good off road they hold you in place really well. we also had harnesses.

mick85 wrote:M1S3RY put up piccies

These are probably most likely the same, same thing for me at least used original rails for drivers side cept for making the hole a little bigger to get the bolts into the seats.

what brand are they?

mick85 wrote:M1S3RY put up piccies

Sorry, this is the only pic i have..