Page 1 of 1
More spotties
Posted: Tue Apr 29, 2008 10:02 am
by 4x4 suzi
Hi
ok i have a 97 paj and put 2 narva spotties on the bull bar, i do a fair bit of night driving in the country and was looking at getting more. thinking about on the top bar of the bull bar? anyone done some strap on mounts up there before? because the bottom rail alrady had tabs but the top doesnt. it is an alloy bar so i would be hard to get some welded on right?
Posted: Tue Apr 29, 2008 10:35 am
by 4x4 suzi
This is the spotties and want to put 2 the same above these ones on the top fat rail
Posted: Tue Apr 29, 2008 1:03 pm
by simmo404
I reckon you should put some spreaders on your roof rack if its strong enough. Better perpheral vision for roos.
Posted: Tue Apr 29, 2008 1:52 pm
by 4x4 suzi
yea i was thining that. were do people run their wire without looking dodgy?
Posted: Tue Apr 29, 2008 8:01 pm
by eddy 76
mate I had extra tabs welded on my alloy bar for 15 bucks each. that was at formula offroad in sydney but you should be able to find somone to do it look for a truck body builder.
cheers eddy
Posted: Tue Apr 29, 2008 9:22 pm
by j-top paj
eddy 76 wrote:mate I had extra tabs welded on my alloy bar for 15 bucks each. that was at formula offroad in sydney but you should be able to find somone to do it look for a truck body builder.
cheers eddy
what he said
Posted: Tue Apr 29, 2008 10:51 pm
by dig3283
you could always go to super cheap or dick smith and get cb aerial mounts for your bull bar and use them they strong enough and do the job and easy to fit or remove them if you dont want them there. just measure your bull bar and pick the right one it comes with to u bolts so it a pinch of piss