Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mk gq box is it the same bolt paten
mk gq box is it the same bolt paten
gday just wanted to no is the mk 5speep box and the gq 5speed box the same bolt patten to the bellhousing. thanks
Not possible without adaptors and a suitable spudshaft. The gearbox mainshaft sizes/splinecount are very similar in size between MK/GQ, but not exact. The T130A transfer case in the MK is only slightly lower in reduction ratio compared to the TX12 transfer in the GQ. For the conversion to be wortwhile,you would keep the gq transfer and adapt the MQ transfer to that giving you double the reduction. BUT that involves machining up an adaptor to replace the back half of the gq transfer. Have a read of the later posts on the 'Nissan Doubler' thread on pirate and you'll get the idea
Nick
Nick
Who is online
Users browsing this forum: No registered users and 1 guest