Outer Limits 4x4 Board

Wheres the best place for rebuild kits for a G13BA donk? Can you buy em as a kit for Zooks or just part by part?



I found these 2 on "THE BAY", not sure of quality though...

http://cgi.ebay.com.au/Suzuki-1-3L-G13B ... m153.l1262

US $213.95
Master Rebuild Kit

G13BA 1.3L

Application :
Samurai 1.3L G13BA 1990 - 1995
Kit includes :

Chrome Piston Ring Set (available in Std, .020 or .040)
Cast Piston Set (available in Std, .020 or .040)
Tri Metal Rod Bearing Set (available in Standard, .010 or .020)
Tri Metal Main Bearing Set (available in Standard, .010 or .020)
Thrust Bearing Set
Timing Belt
Oil Pump
Full Gasket Set
or

http://cgi.ebay.com/ebaymotors/Suzuki-1 ... 0138227635

US $159.95
Engine Rebuilder Kit

G13BA 1.3L

Application :

Samurai 1.3L G13BA 1990 - 1995
Kit includes :

Chrome Piston Ring Set (available in Std, .020 or .040)
Cast Piston Set (available in Std, .020 or .040)
Tri Metal Rod Bearing Set (available in Standard, .010 or .020)
Tri Metal Main Bearing Set (available in Standard, .010 or .020)
Thrust Bearing Set
Full Gasket Set

These guys didn't get as popular as they are for selling rubbish:

http://lowrangeoffroad.com/samengine.htm

Got a VRS kit for $75 off Ebay from a Qld mob (http://stores.ebay.com.au/Just-4x4-Parts)
Let you know what bearings and rings are worth when I get them
I'm tipping with a bit of shopping around you can piece together a full kit locally for the same price or less.
Better to spend our dollars in our country. Supporting our own

SMS diesel parts is the go. They are the Woollies of the diesel engine business.

They are on-line and have outlets across Australia and will post.

v6hilux wrote:SMS diesel parts is the go. They are the Woollies of the diesel engine business.

They are on-line and have outlets across Australia and will post.

but its petrol...

Any good zook wreckers in Melbourne anyone know of for these donks?

$65 for rings
$110 for big and little ends

fool_injected wrote:$65 for rings
$110 for big and little ends

found a donk I think .. supposed to blow no smoke, but would like to swap mine over and rebuild mine..
Parts are cheap
I'd go for a rebore too, 240k klms on the Emo, so it would do with a freshen up, get the head done too.. Want it done right

Will check out these places listed above for pistons too and maybe a cam in the rocket

Thanks Team..

Vitara 'low comp' pistons and a puffer
http://www.tamon.org/forum/viewtopic.ph ... 5b2a116c30
http://www.tamon.org/forum/viewtopic.ph ... 5b2a116c30

contact Engine australia there all over aus incl the east might be ok 4 u....
i got qouted on a td42 rebuild kit $$$$740 so a zook should be dirt cheap......

fool_injected wrote:Vitara 'low comp' pistons and a puffer
http://www.tamon.org/forum/viewtopic.ph ... 5b2a116c30
http://www.tamon.org/forum/viewtopic.ph ... 5b2a116c30

lol.. thought about a turbo, but its a daily driver.. I'd go the twin cam job before i went blower for wat I want.... but thats long time off yet. just wanna get it running finer.