Page 1 of 1

diff housing

Posted: Tue May 06, 2008 8:45 am
by stumpjumper
just wondering if someone could tell me why my rear diff housing has moved 30 ml to the right. on my 93 4runner. only noticed it because the right hand rear tyre is scrubbing out on the outside.and is this hard to put back to where it should be.

Posted: Tue May 06, 2008 2:50 pm
by ShortyFortyTwo
Could be a bent panhard rod.

Posted: Tue May 06, 2008 8:39 pm
by Sic Lux
ShortyFortyTwo wrote:Could be a bent panhard rod.
And/Or Panhard rod bushes another thing to check is mounting point's both ends for cracks.

Posted: Tue May 06, 2008 9:27 pm
by dogbreath_48
Stock suspension? A lift will cause the axle to shift (but 30mm?). Even really sagged springs will cause it to offset at rest.

Posted: Wed May 07, 2008 9:06 am
by stumpjumper
THANKS FOR THE INFO . HAD A LOOK AND THE BUSHES MUST HAVE GONE ON HOLIDAYS AS THEY HAVE DISSAPEARED.

Posted: Wed May 07, 2008 2:04 pm
by dogbreath_48
stumpjumper wrote:THANKS FOR THE INFO . HAD A LOOK AND THE BUSHES MUST HAVE GONE ON HOLIDAYS AS THEY HAVE DISSAPEARED.
How's she drive? :P