Outer Limits 4x4 Board

I need a set of exhaust manifold studs and manifold to turbo bolts/gasket for a 1hdt, can anyone tell me where i can get these at a reasonable price other than Toyota (insert standard toyota genuine spares tax here).

i also need the fittings to tee into the oil pressure sender, the oil return fitting onto the sump, braided oil line, and fittings to tap into the coolant system for water. can anyone recommend a supplier in brisbane for these parts.

It's a CT26 turbo going on to a 1hz

MILO

There is a brass fittings place in Rocklea, Industrial Fittings Supplies I think they are called. They will have all the brass fittings you'll need for tapping into the oil & water lines.

thanks mate. will give them a try

the easy way is to get the studs and gaskets from toyota.