Page 1 of 1
Do any GU's have 15inch wheels as standard
Posted: Tue May 06, 2008 2:59 pm
by g35me
I know nothing about Nissan's so just a quick question as I am thinking of buying a GU and I dont want to have to buy anymore mud wheels/tyres. Do any of the GU's come with 15inch wheels as standard?
98 gu
Posted: Tue May 06, 2008 3:10 pm
by skinna
i just bought a 98 gu 2.8 td st and my nissan sunnys with 33x12.5x15in fit but there very close to touching when flexing up and twisted so im goin to put some 30 coils spacers in hoping thatl help
Posted: Tue May 06, 2008 3:22 pm
by g35me
I have a third set of 35's on 15x10's I'm more wanting to make sure that they will clear the brake calipers as I have always had issues with Landcruisers and spacings. Hence the questions.
Posted: Tue May 06, 2008 3:28 pm
by cooki_monsta
iirc series 3 gu or 4 and later??? cant remember which one, and all 4800 pettys are the only ones with 16" rims due to the bigger brakes, all others had 15's
Posted: Tue May 06, 2008 4:00 pm
by g35me
yep, the bigger brakes had me stumped. Will be looking at 1999 models so I assume they had the smaller brakes and 15inch wheels.
Posted: Tue May 06, 2008 4:35 pm
by grimbo
Posted: Tue May 06, 2008 4:35 pm
by jet-6
They just clear but you cant use stick on weights
Re: Do any GU's have 15inch wheels as standard
Posted: Tue May 06, 2008 6:09 pm
by GUJohnno
g35me wrote:I know nothing about Nissan's so just a quick question as I am thinking of buying a GU and I dont want to have to buy anymore mud wheels/tyres. Do any of the GU's come with 15inch wheels as standard?
No not as standard.
15" will fit most models excluding the 4.8 petrol's and (I think) series 4+ GU's
But it is a tight fit and you would be better off getting 16" rims.
Posted: Tue May 06, 2008 9:04 pm
by Jenko75
I'm running 15x10 on my 1999 GU, fine, not alot of clearance but enough!
(And have stick on weights)
Posted: Tue May 06, 2008 9:27 pm
by Yom
15" definately don't fit on 4.8L GU. All other models use the same brakes (even the series 4 and newer). However its always best to check before you buy - nissan's parts bin is very large if you know what I mean! And 15" steelies usually do fit.
Posted: Wed May 07, 2008 2:13 pm
by j-top paj
cooki_monsta wrote:iirc series 3 gu or 4 and later??? cant remember which one, and all 4800 pettys are the only ones with 16" rims due to the bigger brakes, all others had 15's
nope, all GUs came with 16s standard.
15s will fit on the earlier ones and not the 4.8s
Posted: Wed May 07, 2008 3:43 pm
by cooki_monsta
thanks j top, i could remember something about them, altho didn't know if it was just they fit, or they were factory fitted
Posted: Wed May 07, 2008 6:54 pm
by Yom
Oh from an 80 series you will need the centre bores enlarged. Sometimes this can't be done depending on the design of the seating face. In which case you'll need to source new rims.
Posted: Thu May 15, 2008 6:38 pm
by Bad_Zook
I've got toyota 15x8 sunny's on my '04 td42 ute..
a mate has the same rims on his s2 ute as well.. is a pretty tight fit.