Page 1 of 1
Rim Question
Posted: Tue Feb 17, 2004 8:06 pm
by bogged
Question:
Rims from a Middy Landcruiser (Robbies), they fit GQ?
Thanks.
Posted: Tue Feb 17, 2004 8:09 pm
by Hoonz
yep ... got 15x8 rims off a middy on my GQ now
Posted: Tue Feb 17, 2004 8:12 pm
by bogged
Terrafirma wrote:yep ... got 15x8 rims off a middy on my GQ now
Kewl will chuck the JT on tomorrow to check for clearing....
Posted: Tue Feb 17, 2004 8:18 pm
by ORSM45
dont ya have to die grind the centre hole out to fit over the GQ hub?
Posted: Tue Feb 17, 2004 8:22 pm
by Sixty
Nah, other way round. Cut nissan rims to fit Cruisers
Posted: Tue Feb 17, 2004 8:30 pm
by big red
i had to grind out some hilux rims to fit the centre of my gq hubs, angle grinder was a perfect fit ...only needed about half a mil
Posted: Tue Feb 17, 2004 8:30 pm
by bogged
_________________
if you wanna gain more inches, STROKE IT!
IT DOESNT WORK.. Im stroking it and its still only 4inch...
Posted: Tue Feb 17, 2004 9:18 pm
by hotrod4x4
i also had to clearance rims
alloys that fit toyota , hit on front hubs
i actually ground the hub a tiny bit rather than the rim
but i kno many that machine the rims
Posted: Tue Feb 17, 2004 9:23 pm
by Hoonz
hah ... well i didn't have to do anything ... nah nah nahnah naaaaaah
Posted: Tue Feb 17, 2004 10:10 pm
by hotrod4x4
altho i think steel rims r different
i've got landcruiser steels an they work without any dramas
well i think they r landcruiser versions anyway
Posted: Tue Feb 17, 2004 10:57 pm
by MKPatrolGuy
hotrod4x4 wrote:altho i think steel rims r different
i've got landcruiser steels an they work without any dramas
well i think they r landcruiser versions anyway
Patrol Hubs are 2mm bigger in diameter than cruiser ones
100mm vs 102mm