Page 1 of 1
Front wheel binding on 4Runner
Posted: Fri May 09, 2008 1:04 pm
by a-frame81
I have an 84 4 Runner with a 2" lift on 33's.
When the front is turned on compression I get binding up on the body work. Is there a way to solve this easily without bodylift or spacing the front diff forward?
Ta!
Posted: Fri May 09, 2008 4:17 pm
by tojo_runner
have you got a hammer?
Posted: Fri May 09, 2008 6:58 pm
by brighty
Is this binding on the body or the leaf spring??
I know that sometimes on full lock on a mate of mines, you could hear the lugs from the tyre on the leaf spring as it was under full compression.
Maybe check that out.
Posted: Fri May 09, 2008 11:04 pm
by Sic Lux
I'd say just take to it with a FBH if you don't want to do bodylift or move the diff
Posted: Mon May 12, 2008 10:24 am
by a-frame81
Definately binding on bodywork. There is a lip it looks like inside the guard. I'm pretty sure that's where it's binding. I'll try smashing it with a hammer and see how it goes.........
Thanks for your advice....
Posted: Tue May 13, 2008 7:40 am
by Sic Lux
a-frame81 wrote:Definately binding on bodywork. There is a lip it looks like inside the guard. I'm pretty sure that's where it's binding. I'll try smashing it with a hammer and see how it goes.........
Thanks for your advice....
Yeah FBH that and it should be sweet.