Hi, been looking through the site for info, cant find any, I have a sierra with a G13b fitted, I drove it to work one day, jumped in it at the end of the day and it wouldn't start. Im not a mechanic but the engine has spark, fuel to the fuel rail and cranks over. I bought some test nodes to check if the injectors were getting any signal and they are not. It has a EM2 computer fitted. I have fitted new plugs, leads and coil whilst trouble shooting, it is probably something simple any ideas would be great.
Thanks for you help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G13B - No signal to injectors
Who is online
Users browsing this forum: No registered users and 0 guests