Samurai carb? problem
Posted: Mon May 12, 2008 8:02 am
This is an issue I'm having with my '89 samurai.... standard carb. etc.
Runs fine normally; However, after driving at speed (~100km/h) for a while something goes wrong. It will run OK at full throttle, but at any other throttle setting it is basically dead. It will still Idle ok.
If I pull over and let it idle for a few minutes it seems to come right.
Any ideas?
Runs fine normally; However, after driving at speed (~100km/h) for a while something goes wrong. It will run OK at full throttle, but at any other throttle setting it is basically dead. It will still Idle ok.
If I pull over and let it idle for a few minutes it seems to come right.
Any ideas?