Outer Limits 4x4 Board

i am looking at fitting a front mount intercooler to my GU Wagon TD42T.
I no water to air is the go, but i only got hot EGTs when i am belting down the hwy up long hills at full throttle at higher speeds.
So i am thinking a front mount will help and not be pricy as a water to air setup.
is there a off the shelf intercooler available and what other parts are required to do the fit up and do i have to chop up the grill to get it in.

Cheers

Grant

ive done it.......

fair bit of work involved if you want to keep all the factory coolers in the front and loose alot in your front bar and may affect your winch....


Intercooler & pipe work

Its really quite simple, my brother put a front mount on his when he was bored on two days off, ill dig up a pic and host it

This is the kit my brother made up, he is looking at making a few more to put up for sale, there complete bolt on kits!

Cooler mounted ready for new power steering cooler:


Turbo outlet pipe to cooler, clears the air cleaner box no worries:


Cooler outlet to inlet manifold, no clearance issues again:


Installed behind grille as 1st test fit, perfect fit:


All fitted and all behind he grille and bar without mods!

jet-6 wrote:This is the kit my brother made up, he is looking at making a few more to put up for sale, there complete bolt on kits!

Cooler mounted ready for new power steering cooler:


Turbo outlet pipe to cooler, clears the air cleaner box no worries:


Cooler outlet to inlet manifold, no clearance issues again:


Installed behind grille as 1st test fit, perfect fit:


All fitted and all behind he grille and bar without mods!

gives me wood.

I'd be interested in a price for a kit, as long as it will fit with the winch.