Page 1 of 1
78 series VS 80 series front diff width
Posted: Wed May 14, 2008 9:52 am
by turbo4t
I have a coil sprung high pinion Landcruiser front diff here which measures 140cm between backing plates at the front making the rim mounting surfaces about 161cm apart. Can anyone confirm what it's out of. 6 stud rather than 5. I am thinking 80 series? Ta
Posted: Wed May 14, 2008 10:06 am
by Ice
80 series Mick
Posted: Wed May 14, 2008 10:11 am
by turbo4t
Ice wrote:80 series Mick
Thanks, thought so but the bloke I got it off said he pulled it from a troopy which made me wonder. He does smoke a bit of waccy tobaccy though.
Anyone know what these things a selling for?
Posted: Wed May 14, 2008 10:13 am
by Ice
cheapest i have gotten a set front/ rear for was $300
it would be worth more as a center / axels cv's
has it got hubs or drive flanges ?
check the distance between the coil mounts i guess it could have been modded, one out the back measures 1000mm from centre to centre
Posted: Wed May 14, 2008 10:22 am
by turbo4t
Jeez, that's cheap considering the front use to go for $1K on there own.
Surely the centre would be worth $400 or so. Will probably strip it.
It did have FW hubs but they were gone before I got it. 60 series will go on though.
This is 1000mm as well
Posted: Wed May 14, 2008 10:25 am
by Ice
yeah prices come down i guess as more are out there now, 60 diffs are now cheap as
Posted: Wed May 14, 2008 7:52 pm
by dow50r
did u score them off ebay....watched a set of 80 diffs with ome springs and all suspension go for $280 a while ago....mis-advertised as 100 diffs
Posted: Wed May 14, 2008 10:11 pm
by Ice
not the ones i got, did i mention i got all the links as well
but wow $280 is cheap too