Page 1 of 1
MG410 options
Posted: Wed Feb 18, 2004 8:33 pm
by Badooky
Gday guys New to the site
Any ideas on where to go next
currently running 2in springs (sagged on the front)
2in body lift
31.5x10.5x15 roadies on 15x8 F100 rims
Posted: Wed Feb 18, 2004 9:36 pm
by christover1
even though its a 1.0, I believe the mounting of gearbox, motor and driveline is the same as 1300 stuff, on the marutis. so a 1300, with or without 5speed, or even a 1600 would be easy. christover.
Posted: Thu Feb 19, 2004 7:25 am
by moose
give Joe a ring at 4PLAYOFFROAD !!!
03 97614694 !!!
but next week , he,s on his honeymoon !!!!!
he has a Maruti there that is the Most awsome Zook Ive seen !!!!!!
until his is finished !!!!!
its got .......
SPOA
5.1 gears
lockka,s front & rear
twin transfers
1.6 EFI
Cheezy Racing tray , sliders & bar
34" JT 2,s
satnav
disc rear
& a few more bits !!!!
Posted: Thu Feb 19, 2004 8:28 am
by stephen
The 1.3 will not bolt strait in I had to move the chassis mounts back but there is no transmission/engine clearance problems. I am also running 34" JT2's. Biggest problem with the mg410 is the diffs they bend really easily, we swapped out to jap 1.3 diffs after the first day out.
Posted: Thu Feb 19, 2004 10:39 am
by Badooky
thanks for the tips
are the maruti widetrak diffs very different to the jap ones??
(weaker why??)
is there any way of strengthening the maruti diffs
has anyone got revolers or superiors on the front how do they go??
Posted: Thu Feb 19, 2004 10:50 am
by greg
Badooky wrote:has anyone got revolers or superiors on the front how do they go??
There's a couple of people around who are running them on front and or rear... If you use the search function - you should be able to dig up some of their writeups on the shackles.
Cheers.
Posted: Thu Feb 19, 2004 3:01 pm
by DeWsE
Well I have a feeling that this Brett?
Good to see you on the board!
Are you changing the 1.0L to the 1.3 or 1.6 16v?
Matt
Posted: Thu Feb 19, 2004 3:17 pm
by DeWsE
Posted: Thu Feb 19, 2004 5:47 pm
by Badooky
Gday Matt
yeah im finally online
do some work ya slack ....
dont know what engine im going for time and money as usual
Posted: Thu Feb 19, 2004 6:17 pm
by DeWsE
Work!!!!! What is that??????
The air con is set at 22 degrees...hehe
Well if you need a hand let me know and i'll come break it for you